Status

  • Approved

Type

  • Design
  • Manufacture
  • PM Construction

Technology

  • SO Modular Ltd Closed Panel Timber Frame System & Modular Building System

For more than 20 years SO Modular has been a market leader in the design, manufacture and erection of innovative pre-fabricated timber and modular structures.

From humble beginnings as a joinery, SO Modular has rapidly grown into its current position as the largest Timber Frame manufacturer within Wales. Supplying Timber Frame Modular products to an extensive portfolio of clients including: National Home Builders, Main Contractors, Local Authorities, Private Developers, Commercial Markets and Housing Associations across the UK

SO Modular have knowledgeable internal design and R&D departments which consists of Engineers, Product Designers. Researchers and Timber frame / Modular specialists, meaning we can work with every client to meet their needs, whether it be fully volumetric or a panellised system.

With sustainability at the heart of what we do, SO Modular has invested significantly in their state-of-the-art low waste, low emission and highly efficient manufacturing facility, ensuring your buildings are built to the highest quality standards without costing the earth.

SO Modular Ltd Closed Panel Timber Frame System & Modular Building System

System Description

When constructed up to three storeys, the system comprises timber studs as per engineers requirements and structural grading at max 600mm ccs, using min 9 mm OSB/3 to BS EN 300: 2026 or similar depending on requirements. The inner board may have an integral VCL and air tightness Tape. The core may compromise of a range of insulation options for example Rigid PU board, Wood Fibre, Sheep wool, Warmcell, Jute, Rockwell or Glasswool or similar, depending on requirements. Panels may be manufactured in increments up to 3.5m high and 12.0m long. Panels are supplied in factory cut shapes and sizes in accordance with the design of the building being constructed, including openings for windows, doors and the like, together with fixings and jointing pieces as may be required.

Internally the panels may be lined with additional insulation (thickness and material depending on thermal performance to be achieved), vapour control layer, minimum 38 x 25mm battens to create service void with plasterboard or similar finish.

When constructed from four to six storeys, the construction will be as above, but some walls may change, incorporating closer stud spacing pending structural engineers requirements.

Durability Assessment – 60 Years

Limits on scope

  • Maximum 6 storeys.
  • Bottom members minimum 150mm above external ground level.
  • Minimum 25mm ventilated cavity behind external non-masonry wall claddings.
  • Masonry claddings require a minimum 50mm ventilated cavity.
  • Conventional cladding, such as timber cladding, should have a minimum 25mm drained and ventilated back cavity.
  • Seven Oaks Modular must be contracted for the design, manufacture, supply and erection of the structure.
  • A chartered structural engineer suitably experienced in the design of this type of structure must be sub-contracted for the structural analysis and design.
Back to database